|
|
BLADESHARK™ fits both left- and right-handed hockey blades, and is
applied to both sides of the blade. Identify which BLADESHARK™
applique goes on which side by matching its shape to the shape of the
blade. BLADESHARK™ is tough, waterproof, and durable. It can last
for an entire season of play.
 |
Step 1
Remove all tape, wax and dirt from blade. Clean using a mild,
non-oily solvent, such as naptha or lacquer thinner. |
 |
Step 2
Lightly sand blade until smooth, using sandpaper included. Do not
sand through fiberglass or carbon fiber layer. |
 |
Step 3
Wipe sanded surface again with a clean solvent-dampened cloth, and
allow to dry. |
 |
Step 4
Without touching adhesive backing, carefully separate one corner of
BLADESHARK™ from backing paper. |
 |
Step 5
Position exposed corner of BLADESHARK™ on the blade, and lightly
press it down. Pull remaining backing away while adjusting position
so that adhesive surface contacts blade evenly. Position so that a
uniform margin of the blade is left exposed around top, bottom and
wide end of blade. |
 |
Step 6
Using firm finger pressure, press BLADESHARK™ evenly onto the blade,
working from center toward ends and edges. |
 |
Step 7
Lay blade flat on a rolled up towel and apply heavy pressure with
heel of hand or pound with fist to bond BLADESHARK™ firmly to blade.
Allow to set overnight for best results. |
 |
Step 8
Repeat above steps to apply BLADESHARK™ to opposite side of blade. |
ORDER NOW and be a Puck Predator
with BLADESHARK!
|
